Hardware

Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back fl...

These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 3/4" OD tubing (17-20 mm OD). ...

These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/8" OD tubing (14-16 mm OD). ...

These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/4" OD tubing (6-8 mm OD). Co...

These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/2" OD tubing (12-14 mm OD). ...

Stainless steel swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs. If you're connecting to stainless steel or brass, you...

5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon fl...

EPDM gasket for 2" tri-clamp connection. Temperature rated from -30°F to 300°F.

Type F Camlock Fitting. Male Camlock with 1/2" BSP. 304 Stainless steel construction. 150 psi working pressure.

Type E Camlock Fitting. Male Camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.

This is the installation tool to install spigots in the Vintage Shop ported PET carboys.The wrench has a specially molded hex nut to hold the 5/16 ...

Out of all the ways to attach silicone tubing to your fermenter or kettle, we like quick connect ball lock fittings the most. The ease of connectin...

Connect draft tubing to your keg coupler or faucet shank. Recommended for 3/16" or 1/4" ID draft lines. Tailpiece and hex nut are made of stainless...

This plastic ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurizable growler. It is compatible with ...

Type C Camlock Fitting. Female Camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.

The best choice for large flasks.Two inches in length.

This BrewBuilt Stainless Steel Ball Valve features a locking mechanism that keeps the valve from being opened by a child or passing dog while you a...

Use this barbed fitting with our 1/2" ID Silicone tubing for a better fit. Because Silicone tubing is soft and flexible it actually fits much bette...

Replacement washer for the lever on beer faucets. Concave on one side to match the ball of the lever, and flat on the other side where the rubber w...

Half Coupler with 1/2" Female Pipe Thread. Half couplers have thread for insertion from one side only. 304 stainless. Weld into place. You will nee...

Type A Camlock Fitting. Male Camlock with 1/2" Female BSP. 304 Stainless steel construction. 150 psi working pressure.

3 way stainless steel tee with 1/4 in barbed fittings. Use the tee to split gas lines to push multiple kegs with one CO2 tank.

For insertion into stainless ball valve for connecting 3/8" ID line. Made from 304 Stainless Steel.

Replacement seals for female camlocks. Compatible with Type B, C and D. Comes in pack of 5.