Hardware

1.5" Tri Clover Compatible X 1/2" Male NPT is the most popular fitting we sell. Used in your home brewery to make a Tri Clover connection to ball v...

These are much cheaper than the red ones but the bristles are very light duty in comparison. Universal design and will fit into most all beer fauce...

We use this size for 3/16 ID draft lines. These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. S...

Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen pre-fermentation. The barb is 1/4" OD. (No...

Product Description Replacement ball valve for Gen 4 BrewZillas. The valve has been updated since the Gen 3.1.1 model as it has a different g...

Product Description Tune the Stout Spout on your Intertap or NukaTap faucet with this set of perforated discs! Not all beverages are the same s...

Clamp valve for siphon tubing. Can be used to regulate the flow during siphoning or bottle filling. Fits tubing up to 1/2 inch outside diameter (OD...

Use to connect beer lines half way for flexibility in a multi-purpose draft system. Stainless Steel

Flare Fitting - 1/4 in. Male Flare x 5/16 in. Barb 

Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back fl...

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive...

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive...

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect ga...

This rigid joiner is made from strong polypropylene. It's useful to make rigid joins with push-in fittings that are dead straight. Although it's p...

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive...

This Duotight to 1/2" female thread fitting can be used to connect beverage or gas line to any fitting with 1/2" MPT. Compatible with EVABarrier 9...

This Duotight fitting with 1/4" Flare is perfect for flared gas ball lock and pin lock disconnects. Can also be used to connect gas line to the fl...

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings...

This Duotight fitting makes it easy to split your gas line and run it to multiple kegs. Use one tee for a dual tap kegerator or two tees for a tri...

This Duotight fitting with 3/8" male thread can be used to convert any female threaded 3/8" connection to Duotight. Comes with seated O-ring.  Duo...

Duotight 8 mm OD retaining clip. Locks Duotight fittings in their closed position, making it impossible for any hose to escape. Pack of 10.

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi. This check valve is suitable for ...

This Duotight plug is used to block up your 8 mm (5/16") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. ...

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fitting...