Productos

Descripción Compatible con su acoplador de barril Sanke o con vástago de tiro y se mantiene en su lugar con una tuerca hexagonal y una junt...

Descripción Compatible con su acoplador de barril Sanke o con vástago de tiro y se mantiene en su lugar con una tuerca hexagonal y una junt...

Use this barbed fitting with our 1/2" ID Silicone tubing for a better fit. Because Silicone tubing is soft and flexible it actually fits much bette...

Descripción Este fermentador de primera calidad está hecho de acero inoxidable de grado 304 y tiene un elemento calefactor integrado (ocult...

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles. You will...

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles. You will...

Get to the bottom and sides of that glass carboy. The bent head of the brush makes short work of cleaning the Kraeusen (foam on top of beer) after ...

Half Coupler with 1/2" Female Pipe Thread. Half couplers have thread for insertion from one side only. 304 stainless. Weld into place. You will nee...

Keep your hops in the kettle and out of the fermenter with this hop filter basket. Conveniently hangs inside the boil kettle and can be removed at ...

Descripción Libere el verdadero potencial de FermZilla con el kit de presión FermZilla. Esto permitirá fermentar bajo presión, carbonatar...

Descripción Racor empalmador de acero inoxidable para unir diferentes tamaños de tubería. Recomendado para empalmar tubos de DI de 3/16" ...

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 5/16" or 3/8" ID tubing....

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 1/4" or 5/16" ID tubing to 3/8" ID tubing. The 3/8...

This stainless steel steeping ball is great for making loose leaf tea or adding flavoring ingredients to your kombucha. Measures approximately 2.75...

Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/ae...

Angled 1/4" tailpiece that is used with hex nut. Fits on couplers and shanks. Requires 1-1/16" clearance above the coupler or behind the shank. Mad...

Connect draft tubing to your keg coupler or faucet shank. Recommended for 3/16" or 1/4" ID draft lines. Tailpiece and hex nut are made of stainless...

1" stainless steel hex nut. Used to attach a tailpiece barb to either a faucet shank or keg coupler. You will also need a tailpiece gasket to form ...

Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 1/4 in. tailpiece is commonly used...

Descripción Una gran adición a la línea de equipos de cervecerías pequeñas para mezclar lotes pequeños de granos o para disolver extracto...

Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or...

Stainless steel 3-piece ball valve with tri-clamp connections. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to an...

Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go fr...