Hardware

Descripción Compatible con su acoplador de barril Sanke o con vástago de tiro y se mantiene en su lugar con una tuerca hexagonal y una junt...

This simple tee fitting allows you to turn a PET growler or repurposed soda bottle into a pressurizable growler or mini keg system. PCO 1881 thread...

Replacement ball valve for Gen 4 BrewZillas. The valve has been updated since the Gen 3.1.1 model as it has a different grooved tail end capable of...

Fits PET Carboys. A breathable Silicone stopper that acts as both a stopper and an airlock. Unique design allows CO2 pressure to escape but keeps O...

High temperature o-ring for our weldless valve kits that require only one o-ring. O-ring measures 3/4" ID, and 1 1/4" OD.

This is a 304 Grade Stainless Steel Ball Valve 1/2 BSP Female x 1/2 BSP External Welded Thread. Often used to convert a keg into boil kettle, also ...

This is a replacement Silicone Gasket for our Weldless Kits.  It's easy to lose, despite it's vibrant red color, and sometimes a second gasket may...

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles. You will...

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles. You will...

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 1/4" or 5/16" ID tubing to 3/8" ID tubing. The 3/8...

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 5/16" or 3/8" ID tubing....

Replacement o-ring for the ball valve included with the KegLand Bucket Buddy stainless fermenter. Please note the color of the O-ring recently cha...

Replacement o-ring for the racking arm included with the KegLand Bucket Buddy stainless fermenter. Single o-ring. If you are replacing both o-ring...

Use this fitting to convert 1.5" tri-clamp to Male Quick Disconnect. This fitting is extremely useful when transferring wort from your brew kettle ...

Clamp – Plastic 1/2″ – Package of 4

New! Easier to Sanitize Design We added threads instead of a barb and now you can use the fittings you see at the bottom of this page to connect a...

Descripción Pieza útil para conectar tubos a un enfriador de mosto. Manguera de jardín hembra en un lado, con una púa de 1/2" de diámetro e...

Descripción Rosca macho para manguera de jardín en un lado, púa de 1/2" de diámetro exterior en el otro. Útil para instalar su enfriador de...

Descripción Pieza útil para conectar tubos a un enfriador de mosto. Manguera de jardín hembra en un lado, con una púa de 3/8" de diámetro e...

1" stainless steel hex nut. Used to attach a tailpiece barb to either a faucet shank or keg coupler. You will also need a tailpiece gasket to form ...

Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 1/4 in. tailpiece is commonly used...

This Duotight to Female Beer Thread (5/8" BSP) fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EV...

Descripción Compatible con su acoplador de barril Sanke o con vástago de tiro y se mantiene en su lugar con una tuerca hexagonal y una junt...

 Replacement O-rings for the Stainless Bucket Fermenter, Foundry™, and Crucible™ Valve.